Tyre pressure tool
Making sure your tyres are correctly inflated will help you use less fuel and be safer on the road, and your tyres will last longer.
Frequently asked questions
What's my tyre size?
Tyre size can be found on your tyre's sidewall - roll your mouse over the tyre markings below to find out more.
Why is there more than one tyre size listed?
The tool provides data for a range of tyre sizes that have been nominated as appropriate by the vehicle manufacturer. Please ensure your car’s tyre size matches the given data before inflating your tyres to the recommended pressures. If your tyre size is not included, then that tyre size may not be suitable for your vehicle. If in any doubt, please ask your vehicle manufacturer or consult with a reputable tyre dealer.
How do I check my tyre pressure?
Unscrew the valve cap and set it to the side. (Don’t lose it!)
If you use a pump with in-built tyre gauge often available at petrol stations, enter the correct pressure into the air pump and keep the tyre gauge pressed into the valve system until the air pump beeps.
If you use a foot pump, or the pump does not allow you to pre-select the target pressure, check the pressure first (you could use a pocket gauge) and then adjust it if needed. Press the tyre gauge onto the valve stem. There might be a slight hiss as you press down on the valve stem and again as you release it. You only need to do this for a second or two, long enough to get an accurate reading. If the pressure needs adjusting, inflate or deflate your tyres accordingly. If you turn the gauge’s head around, it will press your valve in and allow you to deflate your tyres. If you are using a foot pump, pump away and check from time to time to see if you have reached the right pressure.
Screw the valve cap back on the tyre, and repeat with all your tyres (and remember to check your spare tyre, too).
Why isn't my tyre pressure shown?
This tool is based upon the best data currently available. While data is available for most light vehicles (weighing less than 3.5 tonnes) produced from about 2000, the data coverage for vehicles built prior to 2000 is more limited.
As more data becomes available, this tool will be updated. In the meantime, if tyre pressure is not yet available for your vehicle, the correct tyre pressure for your vehicle can usually be found on a plate located on the driver's door, inside the fuel filler flap or in your vehicle handbook.
What are PSI, kPa and bar?
What do I do if I am carrying a heavy load or towing a trailer?
Increase your tyre pressure in line with the vehicle manufacturer’s recommendations. If your vehicle handbook does not provide this information, a rule of thumb is to add 4psi (28kpa or 0.28bar) to the recommended pressure.
The tyre pressure tool is designed to give consumers information about the correct tyre pressure for their vehicle. You will be asked to provide your number plate. The tool will then provide you with the correct tyre pressure for your vehicle, based on average operating conditions. The tyre pressure tool relies on data supplied by DriveRightData.Read more